Dartmoor Reel Expert Boost XD

The ultra-light Reel Expert series rear hubs are the upgraded Reel Pro v.2 hubs that were available before. The Reel Expert hubs are equipped with a new wide pawls system with 108 engagement points and a reinforced structure to meet the requirements of modern drivetrains with cassettes generating very high loads when uphilling on a 51T or 52T cog. Each pawl has 2 teeth, catching the ratchet ring at the same time to increase the reliability of the pawls system. This super-strong system has already been used by us in the 2021 Dartmoor product range on Raven and Thunder straight-pull wheels.

There are four versions of Reel Expert rear hubs, three are equipped with aluminum 7075 internal axle and freehubs compatible with Shimano HG (a common type of freehub), Shimano Microspline, or SRAM XD standards. The fourth version is dedicated to e-bikes and is equipped with a Cr-Mo steel internal axle and a Cr-Mo steel Shimano HG freehub to withstand the loads generated by the drivetrains of gravity e-bikes. The Reel Expert rear hubs are equipped with highest quality sealed bearings with LLU full-contact seals branded with the Dartmoor logo and custom selected Mobil waterproof grease for the best mud and dust protection. There are 5 sealed bearings in the hubs with Shimano HG and SRAM XD freehubs and 6 sealed bearings in the hubs with Shimano Microspline freehub.

SPECIFICATION:

• Sizes: 148x12mm; 
• Bearings: precision sealed bearings with high-density grease and full contact LLU sealings
• Bearings type: body: 2x6902; freehub Shimano HG: 2x15267 and 1x6902; freehub Shimano Microspline: 2x15267 and 2x6802; freehub SRAM XD: 3x15267
• Hub-shell: alu 6061-T6
• Axle: 15mm, hard-anodized AL 7075-T6 or Cr-Mo steel
• Cones: AL 7075-T6, push-in (both sides)
• Freehub: AL-7075: common Shimano HG, Shimano Microspline SRAM XD; Cr-Mo steel: common Shimano HG
• Pawls: 6 pawls with 6 individual springs
• Engagement points:108
• Holes: 32H
• Weight: 298g (148x12mm)